3080 LP

Wheel loader

LP in Weidemann means "low position." Thanks to the low position of the driver's position and the seat, the machine has a low design height, so that it can pass smoothly through low steps. In addition, this allows the operator to comfortably access the machine and moves the center of gravity closer to the ground.
3080 LP - Wheel loader
+ Information
Engine data
ModelTD 2.9 L4 S5TCD 2.9 L4 S5
Engine output [kW / CV]45 / 6155,4 / 75
At maximum rpm [rpm]23002300
Cylinders [units]44
Displacement [cm3]29002900
CoolingWaterWater + Charge air
Exhaust standardStage VStage V
Exhaust after-treatmentDPF1 + DOC2DPF1 + DOC2

1 DPF: Diesel particulate filter
2 DOC: Diesel oxidation catalytic converter

Level 1 [km/h]7
Level 2 [km/h]20
Optional [km/h]30
Operating data
Operating weight [kg]4600
Tipping loads**
(According ISO 14397 - EN474-3)*
With bucket straight [kg]3043
With bucket articulated [kg]2577
With pallet fork straight [kg]2546
With pallet fork articulated [kg]2164

* With cabin and 405/70 R18 EM tires
** Horizontal loading frame

Lift cylinder [units]2
Tipping cylinder [units]1
Work hydraulics pressure [bar]210
Work hydraulics discharge volume [l/min]64,4
Driving hydraulics working pressure [bar]450
Steering system
SteeringHydraulic articulated pendulum steering
Articulation angle [º]± 42
Oscillating angle [º]± 12
Steering cylinder [units]1
Filling volumes
Fuel tank capacity [l]82
Hydraulic oil tank [l]66
Electrical system
Operating voltage [V]12
Battery isolator switch
Overall length [mm]5542
Total length without bucket [mm]4647
Center of axle up to the bucket pivot point [mm]1027
Wheel base [mm]2005
Rear overhang [mm]1531
Height of low operator's canopy [mm]2251
Height of high operator's canopy [mm]2409
Height of low cabin [mm]2246
Height of high cabin [mm]2446
Seating height [mm]1409
Total working height [mm]4056
Max. height of the bucket pivot point [mm]3291
Overhead loading height [mm]3019
Dumping height [mm]2474
Scraping depth [mm]123
Total width [mm]1530
Lane width [mm]1240
Ground clearance [mm]324
Maximum radius [mm]4105
Radius on the outer edge [mm]3587
Inside radius [mm]1753
Rollback angle at max. lift height [º]43
Max. angle for bucket emptying [º]39
Rollback angle on the ground [º]42

Related products

Need help?
Our own and third party cookies are used on our website for analytical and marketing purposes. To continue browsing it is necessary to accept the cookie policy.
Configure Reject Accept