Solomix 2 1600-2400 (L) VLH

Trailed mixer wagon - conveyor belt / chain

AUSAMA
AUSAMA
Solomix 2 1600-2400 (L) VLH - Trailed mixer wagon - conveyor belt / chain
Filter
+ Information

Standard

  • 2 twin stream augers (22 mm flighting / 25 mm wings)
  • Trioform auger knives short
  • 2 reversible restrictor blades
  • Wide-angle PTO shaft with 1 3/8-6 profile
  • Adjustable and reversible drawbar with 40 mm drawbar eye (European standard)
  • 540 RPM drive line (1600L-2400) or a 1000/540 RPM drive line (2400L)
  • Two large single wheels
  • Control by bowden cable
  • Wear ring
  • Hydraulic brake system
  • Dual Flow: improved shape of the mixing tub and offset inserts
  • Discharge conveyor at front
  • Larger discharge door with rounded edges for better discharge
  • New stairs with platform and windows, in height adjustable arm for weighing indicator and guidance of hydraulic hoses with storage possibility
  • 2 windows in discharge unit

Optional

Discharge options
  • Rubber cover on discharge unit VL-B or VL-K (right or left)
  • Second drive motor conveyor belt (VLH-B)
  • Longer discharge units instead of standard
  • Longer discharge units with lateral offset on both sides, instead of the standard one
  • Elevated belt extension RHS length 0,9 / 1,2 m for conveyor belt (VLH-B)
  • Chain conveyor LHS instead of RHS (VLH-S)
  • Drive and cylinder for height adjustment of chain conveyor on 1 valve instead of standard (VLH-S)
  • Chain extension 1,2 / 1,5 / 1,8 m instead of 0,9 m (VLH-S)
  • Electric speed regulator cross conveyor belt / chain to both directions
  • Speed regulation cross conveyor with oil-pressure compensation 1 / 2 ways
  • Flow reductor for cross conveyor unit
Brake options
  • Pneumatic brakes with handbrake
Scale system 3-point
  • Triotronic electronic weighing system (2810 Bluetooth - can be connected via bluetooth with the free "Trioliet TFM App"
  • Programmable weighing indicator Triotronic 3610V with USB and SER connection
  • Other weighing options
Gearbox options
  • Reduction gearbox (i=1,7) 540 rpm only
  • Reduction gearbox (i=1,7) with cooling system for 1000 rpm systems
  • Shifttronic 2-speed reduction gearbox
  • Planetary gearbox (i=24,2) for 1000/540 rpm
  • Planetary gearbox (i=17,2) for higher auger speed
  • Electric operation for reduction gearbox
  • Stand alone unit electric operation reduction gearbox
Accessories
  • Electric operation, basic unit
  • Electric operation for any extra accessory
  • Hydraulic operation of 2 restrictor blades
  • Hydraulic jack with bowden cable operation
  • Hydraulic jack with hand-pump
  • Drawbar Ø45 mm with 80 mm offset for weigh bar Ø64 mm
  • 80 mm ball coupling instead of drawbar eye Ø40, machine side, for weighbar Ø 64 mm
  • Lights LED
  • Spanish homologation kit for Solomix / Triomix single shaft
  • Hay ring rubber (h +215 mm)
  • Hay ring steel low profile (h +0 mm)
  • Trioform auger knife short additional
  • Trioform auger knife long additional / instead of standard
  • Trioform auger knife short TC coating additional / instead of standard
  • Trioform auger knife long TC coating additional / instead of standard
  • Top knife set (incl. knife), per auger
  • Magnet on the back of the auger wing (per auger)
  • Heavy duty PTO shaft
Tire options
  • Dual tires 275/70R22.5 instead of 435/50R19.5 (h +40 mm)
  • Dual tires 235/75R17.5 instead of 435/50R19.5 incl. other axle (h -60 mm)
  • Changed axle consoles for dual tires 235/75R17.5 (h -70 mm for 1800-2000L / -60 mm for 2400-2400L)
Other special options
Camera options
Feed management systems - TFM Tracker

Related products

Need help?
Our own and third party cookies are used on our website for analytical and marketing purposes. To continue browsing it is necessary to accept the cookie policy.
Configure Reject Accept