Solomix 2 1600-2400 (L) ZK-T

Trailed mixer wagon - side discharge doors

AUSAMA
AUSAMA
Solomix 2 1600-2400 (L) ZK-T - Trailed mixer wagon - side discharge doors
Filter
+ Information

Standard

  • 2 twin stream augers (22 mm flighting / 25 mm wings)
  • 2 side discharge doors with rounded edges for better discharge in front
  • Manual adjustable discharge chutes
  • Flexible and spacious side door covers
  • Trioform auger knives short
  • 2 restrictor blades
  • Wide-angle PTO shaft
  • Walking tandem axle with four single wheels
  • Adjustable and reversible drawbar with 40 mm drawbar eye (European standard)
  • 540 rpm drive line (1600L-2400) or a 1000/540 rpm drive line (2400L)
  • Window in front of the mixing tub
  • Directly operated by tractor hydraulics
  • Hydraulic brake system with parking brake
  • Wear ring
  • New platform with stairs and windows
  • New, in height adjustable arm for the weighing indicator 

Optional

Brake options
  • Pneumatic brakes
Scale system 3-point
  • Triotronic electronic weighing system (2810 Bluetooth - can be connected via bluetooth with the free "Trioliet TFM App"
  • Programmable weighing indicator Triotronic 3610V with USB and SER connection
  • Other weighing options
Gearbox options
  • Reduction gearbox (i=1,7) 540 rpm only
  • Reduction gearbox (i=1,7) with cooling system for 1000 rpm systems
  • Shifttronic 2-speed reduction gearbox
  • Planetary gearbox (i=24,2) for 1000/540 rpm
  • Speed increaser box (PTO speed) i=1,3
  • Electric operation for reduction gearbox
  • Stand alone unit electric operation reduction gearbox
Accessories
  • Electric operation (basic unit)
  • Electric operation for any extra accessory
  • Valve set with bowden cable operation
  • Bowden-cable operation for any extra accessory
  • Hydraulic operation of 2 restrictor blades
  • Hydraulic jack (direct connection)
  • Hydraulic jack with hand-pump
  • Drawbar Ø45 mm with 80 mm offset for weigh bar Ø64 mm
  • 80 mm ball coupling instead of drawbar eye Ø40, machine side, for weighbar Ø64 mm
  • Lights LED
  • Hay ring rubber (h +215 mm)
  • Hay ring steel low profile (h +0 mm)
  • Trioform auger knife short additional
  • Trioform auger knife long additional / instead of standard
  • Trioform auger knife short TC coating additional / instead of standard
  • Trioform auger knife long TC coating additional / instead of standard
  • Top knife set (incl. knife), per auger
  • Magnet on the back of the auger wing (per auger)
  • Heavy duty PTO shaft
Discharge options
  • Low discharge doors
  • Adjustable side door cover
  • Discharge chain conveyor (L= 0,6 / 0,9 / 1,2 / 1,5 m)
  • Manual adjustable discharge chute with magnet kit
  • Pivoting discharge chute
  • Pivoting discharge chute with magnet kit
  • Deactivation discharge door at LHS or RHS
  • Rear pre-mix door and/or extra ZK side discharge door (with direct connection)
Tire options
  • Wheels 8x 235/75 R 17.5 (h -70 mm)
  • Wheels 4x 435/50 R 19.5 with block profile
  • Forced steered tandem (master bar with Ø50 mm ball head attachment)
  • Welding part with K50 ball head for the attachment of the master bar

Other special options
Camera options
Feed management systems - TFM Tracker

Related products

Need help?
Our own and third party cookies are used on our website for analytical and marketing purposes. To continue browsing it is necessary to accept the cookie policy.
Configure Reject Accept