Solomix P2/P3 2400-3600 (L) ZKX-T

Trailed mixer wagon - discharge doors and straw blower

AUSAMA
AUSAMA
Solomix P2/P3 2400-3600 (L) ZKX-T - Trailed mixer wagon - discharge doors and straw blower
Filter
+ Information

Standard

  • 2 or 3 heavy duty twin stream augers (22 mm flighting / 25 mm wings) 
  • Mechanically driven (by V-belts) straw bedder at front 
  • Low blower pipe for spreading width up to 25 m
  • Short Trioform auger knives
  • 2 (2400L/3600) or 4 (2800) restrictor blades
  • Wide-angle PTO-shaft with shearbolt (1 3/4”- 20 tractor connection)
  • Adjustable and reversable drawbar for low connection with 50 mm drawbar eye (European standard) - 2400L - 
  • Adjustable low drawbar with 50 mm drawbar eye (European standard) - 2800/3600 - 
  • Reduction gearbox standard (with cooling system for 2400L and 2800)
  • Tandem axle with 4 single wheels
  • Hydraulic brake system with parking brake
  • 2 side discharge doors with rounded edges for better discharge in front (2400L-2800) or both on right hand side (3600)
  • Manual adjustable discharge chutes 
  • Flexible and spacious side door covers
  • Electric operation
  • Wear ring

Optional

Brake options
  • Pneumatic brakes
Scale system 3-point
  • Triotronic electronic weighing system (2810 Bluetooth - can be connected via bluetooth with the free "Trioliet TFM App"
  • Programmable weighing indicator Triotronic 3610V with USB and SER connection
  • Other weighing options
Gearbox options
  • Shifttronic 2-speed reduction gearbox
  • Shifttronic 3-speed (including PTO shaft with shearbolt)
  • Planetary gearbox (i=17,2) for higher auger speed
  • Electric operation for reduction gearbox
Accessories
  • Hydraulic operation of 2 restrictor blades, electric operation
  • Hydraulic jack, including electric operation
  • Hydraulic jack with hand-pump
  • Drawbar Ø45 mm with 80 mm offset for weigh bar Ø64 mm
  • Drawbar Ø45 mm with 100 mm offset for weigh bar Ø89 mm
  • Lights LED
  • Hay ring rubber  (h +215 mm)
  • Hay ring steel low profile (h +0 mm)
  • Hay ring steel high profile (h +17,5 cm)
  • Trioform auger knife short additional
  • Trioform auger knife long additional / instead of standard
  • Trioform auger knife short TC coating additional / instead of standard
  • Trioform auger knife long TC coating additional / instead of standard
  • Top knife set (incl. knife), per auger
  • Magnet on the back of the auger wing (per auger)
  • Tractor connection 1 3/8" - 21 spline
  • Tractor connection 1 3/8" - 6 spline
  • Wide wheel stops to protect PTO
Straw bedding options
  • High blower (+300 mm)
  • Dust control with 100 / 175 L water tank
Discharge options
  • Rear premix door with electric operation
  • 1,5 m wide premix door with electric operation 
  • Adjustable side door cover
  • Discharge chain conveyor 3' (L=0,9 m)
  • Manual adjustable discharge chute with magnet kit
  • Pivoting discharge chute 
  • Pivoting discharge chute with magnet kit
Tires options
  • Wheels 8x 275/70 R22.5 (height +4 cm)
  • Wheels 8x 235/75 R17.5 (height -7 cm) -included exchange of tandem-
  • Wheels 4x 435/50 R19.5 (height -12,5 cm)
  • Wheels 8x 275/70 R22.5 (height -14 cm) -included exchange of tandem-
  • Forced steered tandem (master bar with Ø50 mm ball head attachment)
  • Welding part with K50 ball head for the attachment of the master ball
Other special options
Camera options
Feed management systems - TFM Tracker

Related products

Need help?
Our own and third party cookies are used on our website for analytical and marketing purposes. To continue browsing it is necessary to accept the cookie policy.
Configure Reject Accept