Solomix 1 800-1400 (L) VLH

Trailed mixer wagon - conveyor belt / chain

Solomix 1 800-1400 (L) VLH - Trailed mixer wagon - conveyor belt / chain
+ Information


  • 1 long life twin stream auger (22 mm flighting / 25 mm wings)
  • Conveyor unit at front - cross conveyor belt at the rear possible
  • Trioform auger knives short
  • 2 manual operated restrictor blades (reversible)
  • Hand jack
  • Wide-angle PTO shaft
  • Heavy duty planetary drive
  • Adjustable and reversible drawbar for top connection with 40 mm drawbar eye (European standard)
  • 2 wide wheels
  • Remote control by bowden cable operation
  • Wear ring
  • Hydraulic brake system
  • Larger discharge door with rounded edges for better discharge
  • New stairs with platform and windows, in height adjustable arm for weighing indicator and guidance of hydraulic hoses with storage possibility
  • 2windows in discharge unit


Download options
  • Rubber cover on discharge unit VL-B or VL-K (right or left)
  • Second drive motor conveyor belt (VLH-B)
  • Longer discharge units instead of standard
  • Longer discharge units with lateral offset on both sides, instead of the standard one
  • Elevated belt extension RHS length 0,9 / 1,2 m for conveyor belt (VLH-B)
  • Chain conveyor LHS instead of RHS (VLH-S)
  • Drive and cylinder for height adjustment of chain conveyor on 1 valve instead of standard (VLH-S)
  • Chain extension 0,6 / 1,2 / 1,5 / 1,8 m instead of 0,9 m (VLH-S)
  • Electric speed regulator cross conveyor belt / chain to both directions
  • Speed regulation cross conveyor with oil-pressure compensation 1 / 2 ways
  • Flow reductor for cross conveyor unit
Scale system 3-point
  • Triotronic electronic weighing system (2810 Bluetooth - can be connected via bluetooth with the free "Trioliet TFM App"
  • Programmable weighing indicator Triotronic 3610V with USB and SER connection
  • Other weighing options
Gearbox options
  • Reduction gearbox (i=1,7) 540 rpm only
  • Planetary gearbox (i=22,9) for 1000/540 rpm
  • Planetary gearbox (i=24,2) for 1000/540 rpm
  • Electric operation for reduction gearbox
  • Stand alone unit electric operation reduction gearbox
  • Electric operation, basic unit
  • Electric operation for any extra accessory
  • Hydraulic operation of 2 restrictor blades
  • Hydraulic jack with bowden cable operation
  • Hydraulic jack with hand-pump
  • Drawbar Ø45 mm with 80 mm offset for weigh bar Ø54 mm
  • Pneumatic brakes
  • Lights LED
  • Spanish homologation kit for Solomix / Triomix single shaft
  • Hay ring rubber S1 (h +215 mm)
  • Hay ring steel low profile (h +0 mm)
  • Trioform auger knife short additional
  • Trioform auger knife long additional / instead of standard
  • Trioform auger knife short TC coating additional / instead of standard
  • Trioform auger knife long TC coating additional / instead of standard
  • Top knife set (incl. knife), per auger
  • Magnet on the back of the auger wing (per auger)
  • Heavy duty PTO shaft
Tire options
  • Dual tires 8.15-15 14 PR instead of 400/45L 17.5 (h -40 mm)
  • Double wheels 235/75 R17.5 instead of 400/45L 17.5 (h +0 mm)
  • Tires 435/50 R19.5 instead of 400/45L 17.5 (h +140 mm)
Other special options
Camera options
Feed management systems - TFM Tracker

Related products

Need help?
Our own and third party cookies are used on our website for analytical and marketing purposes. To continue browsing it is necessary to accept the cookie policy.
Configure Reject Accept