I want more
information

TANGO 730 data | ||
---|---|---|
Working width [m] | 6,70 - 7,30 | |
Windrow width [m] | 0,80 - 1,50 | |
Diameter of rotor with arms [m] | 3,35 | |
Transport width / height [m] | 3,00 / 3,99 | |
Parking height [m] | 3,90 | |
Necessary hydraulic couplers | 1x single acting + 1x double acting | |
Working capacity [ha/h / ac/h] | ~ 7,50 / ~ 18,50 | |
Number of arms per rotor [pcs.] | 11 | |
Number of tines per arm [pcs.] | 4 | |
RPM | 540 | |
Recommended RPM | 350-450 | |
3-point hitch cat. | II | |
Power demand [HP] | from 60 | |
Tires (with inner tubes) | 16 x 6,5 - 8 (under the rotors) - 2x 350/55-16 (rear) | |
Weight [kg] | 2840 | |
PTO shaft | tractor-rake: wide angle, built-in: 1. without clutch, 2. with freewheel overload clutch | |
Windrow | on the right |