4080 T Basic Line

Tele wheel loader

When it comes to reaching a higher lift height, telescopic wheel loaders are the best choice. In addition to great functionality, a high level of comfort and the highest safety standards, compared to normal wheel loaders with a loading arm, these machines have a telescopic arm that gives them a much higher lifting height and reach. This is where the main advantages such as maneuverability, stability and lifting force, which characterize an articulated wheel loader, also apply to a telescopic wheel loader; that's why they are so successful.
AUSAMA
AUSAMA
4080 T Basic Line - Tele wheel loader
Filter
+ Information
Engine data
ManufacturerDeutz
ModelTCD 2.9 L4 S5
Engine output [kW / CV]55,4 / 75
At maximum rpm [rpm]2300
Cylinders [units]4
Displacement [cm3]2900
CoolingWater + Charge air
Exhaust standardStage V
Exhaust after-treatmentDPF1 + DOC2

1 DPF: Diesel particulate filter
2 DOC: Diesel oxidation catalytic converter

Speed
Level 1 [km/h]7
Level 2 [km/h]20
Optional [km/h]30
Operating data
Operating weight [kg]6100
Tipping loads*
(According ISO 14397 - EN474-3)Retracted / extended
With bucket straight [kg]3565 / 2049
With bucket articulated [kg]3074 / 1743
With pallet fork straight [kg]3171 / 1916
With pallet fork articulated [kg]2729 / 1624

* Horizontal loading frame

Hydraulic
Lift cylinder [units]1
Tipping cylinder [units]1
Work hydraulics pressure [bar]235
Work hydraulics discharge volume [l/min]103
Driving hydraulics working pressure [bar]450
Steering system
SteeringHydraulic articulated pendulum steering
Articulation angle [º]42
Oscillating angle [º]± 12
Steering cylinder [units]1
Filling volumes
Fuel tank capacity [l]82
Hydraulic oil tank [l]66
Electrical system
Operating voltage [V]12
Battery isolator switch
Dimensions
Overall length [mm]5929
Total length without bucket [mm]5180
Center of axle up to the bucket pivot point [mm]1394
Wheel base [mm]2189
Rear overhang [mm]1531
Height with high cabin [mm]2660
Seating height [mm]1590
Total working height [mm]5815
Max. height of the bucket pivot point [mm]5076
Overhead loading height [mm]4651
Dumping height [mm]4226
Scraping depth [mm]126
Total width [mm]1742
Lane width [mm]1432
Ground clearance [mm]352
Maximum radius [mm]4275
Radius on the outer edge [mm]3840
Inside radius [mm]1848
Rollback angle at max. lift height [º]45
Max. angle for bucket emptying [º]30
Rollback angle on the ground [º]36

Related products

Tele wheel loader

5080 T

Weidemann

Tele wheel loader
Tele wheel loader

2080 T

Weidemann

Tele wheel loader
Tele wheel loader

9580 T

Weidemann

Tele wheel loader
Need help?
Our own and third party cookies are used on our website for analytical and marketing purposes. To continue browsing it is necessary to accept the cookie policy.
Configure Reject Accept